Muc-Off Ceramic Protection Kit

The Muc-Off Ceramic coating is a highly advanced, durable, silicon-infused protective layer that chemically bonds to your paintwork, producing a high-performance hydrophobic layer for maximum water and dirt shedding properties. It’s designed to keep your steed cleaner for longer, and much easier to clean and maintain. This is because the coating drastically reduces the surface tension, providing long term, year-round protection to your pride and joy, even in the harshest weather conditions. It also contains UV protection to help ensure your paint doesn’t fade in direct sunlight and can help reduce the risk of micro scratches.

Safe to use on paintwork, carbon fibre, metal components, wheels, vinyl and rigid plastic trim with protection lasting up to 2 years as its chemical resistant. You can use it on Gloss or Matt finishes (After curing it will give a richer and darker colour tone on matt finishes).

• 1 x 15ml Ceramic Coating
• 1 x 50ml Surface Preparation Spray
• 1 x Microfibre Applicator Pad
• 2 x Luxury Microfibre Buffing Cloths

• Quick and easy to apply
• Superior paint gloss enhancement
• Industry-leading slickness
• Dirt and grime repellence
• UV Protection
• Extreme water shedding and hydrophobic properties
• Liquid repellence providing a water contact angle of between 100°- 110°
• 9H Scratch resistance
• Chemical resistance
• Durable – Can last up to 2 years on surfaces*
• Perfect for Bicycles, E-Bikes, Motorcycles, Cars, ATV’s and more
• Suitable for gloss and matt finishes. (After curing it will give a richer and darker colour tone on matt finishes)
• Can be used on paintwork, carbon fibre, metal components, wheels, vinyl and rigid plastic trim
• Makes cleaning and maintenance a breeze

*Ensuring you follow all preparation, application and maintenance instructions included on the packaging.

PREPARING THE SURFACE

1. Thoroughly wash your bike using Nano Tech Bike Cleaner, Punk Powder or Snow Foam, then ensure it is completely dry before starting the coating process
2. Depending on the condition of the paint or surface, perform the appropriate level of paint correction to remove any defects including swirl marks, water spots, and scratches. Keep in mind this product is very durable and will seal in any imperfections
3. Remove any excess paint correction or wax/polish residue by wiping all painted surfaces with surface prep spray. Simply spray onto the microfibre cloth and wipe down

CERAMIC COATING APPLICATION

1. We recommend applying the coating in a cool, dry, clean area, inside with good lighting and ventilation. For non-factory finishes test a small inconspicuous area prior to full coverage.
2. Shake the bottle thoroughly for 10 seconds to activate the formula.
3. We recommend wearing protective gloves when applying the coating.
4. Unscrew the child-resistant cap, then apply the coating sparingly and evenly along the provided microfiber applicator pad. (A little coating goes a long way).
5. Starting at the highest surfaces, work in a crosshatch #, overlapping pattern to ensure all areas are coated. We recommend limiting application areas to the approximate size of 1 bike tube/panel at a time. Relax and take your time, applying slowly and carefully for the best results.
6. Add additional coating to the applicator pad when the coating is not being applied evenly and or the applicator does not glide over the surface smoothly.
7. Allow the wet coating to cure for 5 minutes. During this time the coated surface will develop a rainbow-like appearance. In this time check that you have covered all areas. Using the provided microfiber cloth, lightly buff the surface using small circular motions to a high gloss, mirror-like finish. Be sure to check the surface in multiple light angles to ensure all the rainbow effect has been removed. Do not allow the wet coating to cure for longer than 5 minutes and ensure it has all been buffed off.
8. Once buffed off, let the coating fully cure for 24 hours in a cool dry place before exposing it to water or the elements. (For best results and adhesion, we do not recommend washing for at least 48 hours after application).
9. You can easily layer up the coating with a second application for even longer durability, simply follow the costing application instructions above after the first layer has fully cured. You do not need to re-prep.
10. Use within 6 months once opened
11. Go ride!

Why ceramic coating? Why not wax? Or other protectants and polishes?

1. Ceramic Protection is designed to keep your bike cleaner for longer, protecting and prolonging the life of your paintwork.
2. In turn this investment helps maintain your bikes value, helps reduce your cleaning and maintenance time because of the slickness of the coating and gives the surface a level of gloss and colour depth incomparable to anything else.
3. It also contains UV protection to help ensure your paint doesn’t fade in direct sunlight and can help reduce the risk of micro scratches.